Audac COM12MK2 is an amplifier with a total of five different zone outputs. The five zones all have the same volume level set with the master volume, but they can be turned on / off individually.
COM12MK2 has a 3-layer priority function.
When one input receives a signal, all inputs with lower priority are silenced.
High priority: Tele-paging, external sealing contact can be used to silence (mute) all other incoming signals. For example, when the fire alarm goes off.
Medium Priority: Chime, Remote Mic, CH1 and CH2 with separate switch for priority function in On-mode.
Low priority: CH1 and CH2 with separate switch for priority function in Off-mode, Ch3, Ch4, Ch5, Ch6.
COM12MK2 can be rack mounted (19“ 2RU), rack brackets included.
4 microphone inputs, each with phantom power 15V and 2 channels with priority mode
2 line inputs / stereo, unbalanced
2 line inputs / mono, bal. (priority + phantom) 1 link input
1 remote microphone input
Can be connected to phone line
Volume Control for all input channels
Zone outputs: 5 (100V/83 ohms)
1 low impedance output (4 ohms)
1 pre-amp output
1 link output
- Voltage: 230V/50Hz
- Weight: 9.76 kg
- Dimensions: 420x88x320 mm, 19″ 2RU with brackets
- Power: 120W RMS, Class AB
- THD at 1 kHz: Less than 0,5%
- Frequency range: 20Hz – 20kHz
- S/N: 90dB at 1kHz
- Crosstalk: >70dB
low impedance 22 V / 4 ohm
100 V / 83.3 ohms
70 V / 41.7 ohms
25 V / 5.2 ohms
- Output 4 ohms: 2-pin screw terminal ~ 5.08 mm
- Output 100V/70V/25V: 10-pin screw terminal ~ 5,08 mm
- Fan cooled